Texsource Tex-Blend Spot Remover Fluid

Used in spot cleaning gun.

Overview

• Contains high grade solvents that break down cured or uncured inks and adhesives upon impact 
• Removes plastisol inks, water-based inks, grease, soil, oil, latex, and most non-food stains from fabric 
• Little to no trace is left on garment after use
• 100% non-flammable
• Evaporates and dries in a flash 
• Intended for use in most models of high-powered electric spot guns 
• Chlorinated solvent odor 

Precautions

• Use outdoors or in a well-ventilated area 
• Use vacuum exhaust system to stabilize soiled garments and reduce vapor exposure 
• Do not skip “PPE”, wear gloves, safety glasses or goggles, and a mask to minimize exposure to harmful vapors and liquids
• Wash hands thoroughly after handling 
• If using with a high-pressure spray gun, do NOT aim at hands, eyes, skin, or clothing covering these areas 
• Consult SDS sheet for more information

Instructions

Ensure operation area is well ventilated before using Tex Blend Spot Remover. Pour fluid into the cleaning gun jar. Place stained material on cleaning arm (or “buck”) of a vacuum exhaust system. Spray fluid into stained area. Once stained area is removed, “feather out” area until there is no longer a sharp outline. Repeat process if necessary.

 WARNING: This product can expose you to chemicals including methylene chloride and perchloroethylene which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.