Skip to content
Take advantage of Free Shipping at $299 on qualifying online orders
Take advantage of Free Shipping at $299 on qualifying online orders

Clearance Ink - Rutland Low Cure White - Quart

SKU ClearancePMS
Original price $25.00 - Original price $25.00
Original price
$25.00
$25.00 - $25.00
Current price $25.00
Title: Quart


QUART SIZE. 

All clearance items ship from our North Carolina location and are limited to specific quantities and colors while supplies last. No returns. 

LC9800 Low Cure White is a flexible temperature cure ink for 100% poly fabrics. When printing on fabrics that exhibit unstable dyes, this ink allows you to drop the cure temperature as low as 270°F/132°C offering you better dye migration control and lowering energy consumption costs. Low Cure White shears down to a very creamy body and produces a bright, opaque, matte finish with soft hand and terrific fiber control.

  • Lower cure temperatures allow for better control on fabrics that may shrink or distort under higher temperatures
  • Supple hand and excellent elasticity
  • Stable finish even at higher cure temps, this ink does not "puff" or swell as much as competitive products
  • High opacity on darker fabrics facilitating non-migrating pigments
  • Energy savings and cooler operating temperatures
  • Excellent bleed resistance
  • Non-phthalate

Printing Tips 

Adjust flash cure temperature and dwell time so ink is just dry to touch. Avoid excessive flash temperatures to protect fabric and migration of dyes. Depending on flash unit, a 3 - 5 second flash is adequate.

For best results, use a print-flash-print technique to ensure sufficient ink deposit on dark fabrics.

Use 86–230t/in (34-90t/cm) mesh screens with high tension for best performance, ink release and opacity. Lower mesh equals more deposit. Use higher meshes to achieve half tones.

Adjust your print parameters to allow this ink to clear fully on the second stroke using medium to low pressure for best dye blocking and opacity. As this ink shears down, less pressure will be required. Adjust accordingly.

Curing is a time and temperature process. Using a lower temperature, at a lower belt speed will provide the best result without damaging the fabric.

A behavior for high-opacity low cure inks is to "body-up" or gain viscosity when at rest. Be sure to "Pre-shear" or agitate this ink before use to achieve optimal flow before printing. Be careful to not use highspeed drills or similar equipment that will create friction-heat that can cause the ink to begin to cure. Store ink buckets up off of cold floors to reduce pre-shear time.

Fabric Types

100% Polyester & Poly blends

Mesh

86-230 mesh count

Squeegee

Durometer: Medium: 60-70, 60/90/60
Profile: sharp, square
Stroke: 2 stroke, medium speed
Angle: 10° -20°

Stencil

Standard Emulsion
Off Contact: 1/16” (2mm)
Emulsion Over Mesh: 15-20%

Flash and Cure

Flash: 150° F (66° C)

Cure: 270°-320° F (132° -160° C)