Skip to content

Saati Textil PHU Photopolymer Emulsion

by Saati
SKU SAT-PHU-QT
Original price $30.47 - Original price $84.22
Original price
$30.47
$30.47 - $84.22
Current price $30.47
Select Size: Quart

free shipping item

Saati Textil PHU is an all-purpose solvent and water resistant photoemulsion.  It is a high-performance, durable, economical choice for plastisol, silicone, and water based inks. 


Characteristics
- Red one part pure photopolymer emulsion
with universal ink resistance
- Exposes 8X faster than typical two part emulsions

Features and Benefits
- 45% solids and high viscosity for easy coating
and good bridging on all mesh counts
- Universally resistant, can be used with solvent based,
UV, and water based inks, yet is easy to reclaim
- Recommended for use with discharge inks as is,
without using diazo or catalyst for stencil hardening
- Can be used with Diazo 11 when extra
sharpness is required for high resolution

DIRECTIONS FOR USE
Handle under yellow safelight or low wattage tungsten lights. Avoid exposure to daylight, quartz/halogen lamps, cool white fluorescent lamps or discharge lamps.

Sensitizing & Mixing
Emulsion is presensitized during production and does not require mixing.

Shelf Life - Approximate shelf life for this emulsion is 24 month (2 years) when stored at room temperature.  It should not be stored at temperatures above 80f (27c) or below 37f (0c).  For best results it should only be stored in its original container. 

Emulsion Exposure Differences
Proper screen exposure must take many factors into account – the emulsion type, coating thickness, exposure unit, etc. As a general guideline for the different emulsion types (diazo, dual cure, and photopolymer) use these times as a reference.

Photopolymer – These are typically the fastest exposing emulsions, with many exposing correctly from 30-50 seconds. The shortest times can be seen when using a newer LED-type exposure unit.

Dual Cure – If you have established a good exposure time with photopolymer emulsions, you can typically add 90 seconds (1.5 minutes) to that time for most dual cure emulsions.

Diazo - If you have established a good exposure time with photopolymer emulsions, you can typically add 210 seconds (3.5 minutes) to that time for most diazo emulsions.

These times will depend heavily on your exposure unit and should only be considered as a starting point.
safety data sheet