Aquarius Bright Discharge Mixing White - Low Viscosity ZF

Aquarius™ Bright Discharge White LV ZF is designed to be mixed with Bright Discharge Base to obtain thousands of Pantone® approved colors.  Aquarius™ Bright Discharge ZF range consists of a high opacity soft hand discharge white and a soft, bright discharge base. Designed to achieve bright discharge white and colors whilst maintaining a super soft flexible hand.

Benefits

• Complete water based ink portfolio
• Includes extensive range of special effect pastes
• Enhanced on press performance
• Universal pigment system
• Supported by IMS Formulation software
• Brand RSL compliant

ADDITIVES

• Aquarius™ Discharge Activator ZF 6% Max
• Aquarius™ Softener 1-5%
• Aquarius™ Thickener 0.1-1%
• Aquarius™ Retarder Gel 1-5%

PRINTING TIPS

• Use 6% Aquarius™ Discharge activator ZF. Mix well and leave for 10 minutes to dissolve. Remix immediately prior to adding to the screen. Once activated inks colors should be used within 8 hours to prevent any color change issues. To prevent wastage only activate a small amount of color at a time.
• Use with 100% Cotton Dischargeable fabrics.
• White can be used as stand alone white, as an underbase for plastisol colors or as a highlight white
• Colors should be made in accordance with Aquarius™ IMS Pantone® mixing system with a maximum of 6% pigment loading to ensure crock performance is maintained.
• Use 86-230T/34 (34-90T) mesh for best performance and color brightness
• Avoid the use of flash cures. Print discharge colors dark to light, wet on wet. Print Aquarius™ Bright Discharge White in the last position.
• Prints should be cured at 330o F/165o C for 90 seconds. Check the cure temperature at the ink surface.