Rutland M3 LC (Low Cure) Mixing Ink - Scarlet

Rutland M3 Inks in a New LOW CURE / FLEX CURE Formulation!  Rutland™ M3 LC (Low Cure) is an easy to use, highly accurate finished color mixing system. This system is much more forgiving than a PC-based product because it doesn't require as precise a measurement of the base and additives to complete a formula. The M3 LC system consists of flexible cure inks created to provide an excellent wet-on-wet performance

Highlights:

• M3 LC colors directly replace the origin (non low-cure) M3 mixing colors
• M3 LC inks are opaque resulting in excellent coverage on dark garments
• The tack-free formula allows printing through a range of mesh counts without
  the need for a viscosity modifier
• No build-up formulations ensure the highest print efficiencies without down
  time for wiping screens
• Mix thousands of finished ink colors by choosing Pantone colors from our IMS
  3.0 Ink Mixing Software or by custom mixing your own colors
• Only 14 components
• Non-phthalate; Internationally compliant

Printing Tips:

• Important: Pallet temps need to remain between 135°F to 145°F (57°C -
  62°C). Use a laser gun to measure temperature on the cool station. The
  temperature must cool down to 145°F (62°C) before moving to the next
  print station.
  
• Printing on white garments: Mix per formulation or by eye to achieve
  brilliant colors
• For extremely soft hand prints, mix finished color up to 10% of LC0000 Chill
  Relax Extender
• Printing on dark garments or over an underlay: When printing on dark
  garments, mix per formulation or custom blend to achieve brilliant colors
  over an underlay
• Use low bleed whites on poly/cotton blends and LB0266 Chill LB LC
  Barrier Base when printing on 100% polyester

Fabric Types:
100% Cotton, (*) poly/cotton blends,
100% polyester

Curing:
Flash Cure: 140-150°F (60-65°C)
Curing:  270-320°F

Mesh:
Count: 86-305 t/in (34-120t/cm)
Tension: 25n/cm3

Stencil:
Standard Emulsion
Off Contact: 1/16” (2mm) or greater
Emulsion Over Mesh: 15-20%

Additives:
K2940 HUGGER CATALYST
K2912 VISCOSITY BUSTER LC

Storage:
65 -95° F (18 -35° C)
Avoid direct sunlight.
Use within one year of receipt.
Keep container well sealed.