Texsource RFU Water Based Ink - Russel Gray

NOTE - Due to availability, this product may require an additional processing time of 1-2 days.   

Approximate PMS Match: 429C

Texsource Waterbased Inks are non-PVC, non-Pthalate inks and are perfect for anyone that is looking to try out or switch to printing with waterbased inks. You get supersoft hand feeling prints, sharp details, and bright colors on 100% cotton, blends, or synthetic fabrics.

Our Waterbased inks provide decent color saturation and opacity whether you are printing on light or dark colored garments.

Ready-For-Use:
No need to mix in pigments, simply pour or scoop ink onto the screen and start printing. Works best on light colored garments.

Printing Instructions:
Print wet on wet. Light to Dark. Water based ink is prone to drying out quickly and can cause screen blockages. If you need to walk away from press for more than 45 minutes put the excess ink back into the container to preserve ink and clean the remaining ink on the screen to prevent blockages.

Stencil:
Must use Water Resistant Emulsion such as Xenon Tex-Edge Dual Cure Emulsion or an emulsion hardener like, Chromaline Chromaset.

Flash:
NOT recommended

Curing:
330°F/165°C for 90 seconds

Mesh Count:
110-320