Vastex EconoRed III Conveyor Dryer - 21,600w - 54"
by Vastex
SKU VAS-EC-III-54
Call To Order
Original price
$12,100.00
-
Original price
$12,100.00
Original price
$12,100.00
$12,100.00
-
$12,100.00
Current price
$12,100.00
Click HERE to request a freight quote on this item.
EconoRed III dryers in 30 and 54 in. (76 and 137 cm) belt widths cure garments screen-printed with plastisols, water-based inks or discharge at higher rates, in a smaller footprint, at lower cost and more quietly than the BigRed3 dryers they replace.
Model ER-III-30, with 30 in. (76 cm) wide belt and three 24 in. (61 cm) wide heaters (total 10,800 watts) cures up to 475 plastisol-printed garments/h, or 100 garments/h screen-printed with water-based ink or discharge.
Model ER-III-54, with 54 in. (137 cm) wide belt and three 48 in. (122 cm) heaters (total 21,600 watts) cures up to 950 plastisol-printed garments/h, or 300 garments/h screen-printed with water-based ink or discharge.
Capacity of both models can be doubled, tripled or quadrupled by adding one, two or three modular heating chambers and conveyor belt extensions — as new or when needs grow.
A top-mounted ventilation system filters exhaust air, cools the enclosure's outer skin, and evacuates moisture and fumes from the heating chamber. It also makes ER-III dryers over 20 percent quieter and 5 in. (13 cm) narrower, and allows the control box to be positioned the right side (standard) or left side of the enclosure to suit shop layouts.
All heaters feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing, and come with a 15-year warranty.
The Vastex Infrared Focusing System allows heater adjustment to any height from 2 to 7 in. (5.1 to 17.8 cm) above the belt, allowing the operator to compensate for bulky garments or hats.
All models include a digital belt speed display and a belt tracking system for increased belt life. The digital PID temperature controller is accurate to +/- 1°F (+/-0.5°C), allowing the operator to fine-tune or accurately repeat drying results at any future time.
ADVANCED
Top-mounted, Focused Exhaust Air System evacuates fumes and moisture quickly
QUIET
20% quieter than earlier models
ACCURATE
Temperature controller accurate to +/-1°F (+/-0.5°C)
Digital PID with fuzzy logic — industry's most advanced
ADJUSTABLE
Infrared Focusing System allows 2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment to accommodate hats or bulky garments, and can be customized to provide additional heater clearance
INNOVATIVE
Engineered to be shorter and slimmer with high heat and production
PRECISE
Digital belt speed display for more accurate control
POWERFUL
Focused exhaust system removes moisture and fumes fast
FILTERED
Filtered air intake provides clean curing air to preserve images from contamination
HEAVY DUTY
"X-Series" Conveyor Belt Tracking System
BELT WIDTH
(Maximum garment width)
30" (76 cm) or 54" (137 cm)
HEATER WIDTH
24" (61 cm) or 48" (122 cm)
MAXIMUM IMAGE WIDTH
18 in. (46 cm) or 42 in. (107 cm)
(Heater width minus 6 in. [15 cm])
EXPANDABLE
Add heat chambers and belt extensions
POWER OPTIONS
240V / 97A / 1 Ph. / 3 wire 50/60HZ
240V / 55A / 3 Ph. / 4 wire 50/60HZ
400V / 30A / 3 Ph. / 5 wire 50/60HZ
480V / 29A / 3 Ph. / 4 wire 50/60HZ
All amps shown are FLA (Full Load Amps), not recommended line size! This dryer must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
OPTIONS
Model ER-III-30, with 30 in. (76 cm) wide belt and three 24 in. (61 cm) wide heaters (total 10,800 watts) cures up to 475 plastisol-printed garments/h, or 100 garments/h screen-printed with water-based ink or discharge.
Model ER-III-54, with 54 in. (137 cm) wide belt and three 48 in. (122 cm) heaters (total 21,600 watts) cures up to 950 plastisol-printed garments/h, or 300 garments/h screen-printed with water-based ink or discharge.
Capacity of both models can be doubled, tripled or quadrupled by adding one, two or three modular heating chambers and conveyor belt extensions — as new or when needs grow.
A top-mounted ventilation system filters exhaust air, cools the enclosure's outer skin, and evacuates moisture and fumes from the heating chamber. It also makes ER-III dryers over 20 percent quieter and 5 in. (13 cm) narrower, and allows the control box to be positioned the right side (standard) or left side of the enclosure to suit shop layouts.
All heaters feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing, and come with a 15-year warranty.
The Vastex Infrared Focusing System allows heater adjustment to any height from 2 to 7 in. (5.1 to 17.8 cm) above the belt, allowing the operator to compensate for bulky garments or hats.
All models include a digital belt speed display and a belt tracking system for increased belt life. The digital PID temperature controller is accurate to +/- 1°F (+/-0.5°C), allowing the operator to fine-tune or accurately repeat drying results at any future time.
ADVANCED
Top-mounted, Focused Exhaust Air System evacuates fumes and moisture quickly
QUIET
20% quieter than earlier models
ACCURATE
Temperature controller accurate to +/-1°F (+/-0.5°C)
Digital PID with fuzzy logic — industry's most advanced
ADJUSTABLE
Infrared Focusing System allows 2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment to accommodate hats or bulky garments, and can be customized to provide additional heater clearance
INNOVATIVE
Engineered to be shorter and slimmer with high heat and production
PRECISE
Digital belt speed display for more accurate control
POWERFUL
Focused exhaust system removes moisture and fumes fast
FILTERED
Filtered air intake provides clean curing air to preserve images from contamination
HEAVY DUTY
"X-Series" Conveyor Belt Tracking System
BELT WIDTH
(Maximum garment width)
30" (76 cm) or 54" (137 cm)
HEATER WIDTH
24" (61 cm) or 48" (122 cm)
MAXIMUM IMAGE WIDTH
18 in. (46 cm) or 42 in. (107 cm)
(Heater width minus 6 in. [15 cm])
EXPANDABLE
Add heat chambers and belt extensions
POWER OPTIONS
240V / 97A / 1 Ph. / 3 wire 50/60HZ
240V / 55A / 3 Ph. / 4 wire 50/60HZ
400V / 30A / 3 Ph. / 5 wire 50/60HZ
480V / 29A / 3 Ph. / 4 wire 50/60HZ
All amps shown are FLA (Full Load Amps), not recommended line size! This dryer must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
OPTIONS
- Heating chambers @ 36 in. (91 cm) long
- Belt extensions, front or rear @ 18 in. (46 cm) long
- Control box on left side (right side standard)
- Exhaust hood for extra fume extraction
- Hat support rail
- Locking casters for mobility
- Reversing belt/HD Drive
-
Additional heater clearance
 |
 |
 |
 |