Vastex LittleRed X3-D Series Dryer - 17,800w - 54"
by Vastex
SKU VAS-LR-X3D-54-240
Call To Order
Original price
$10,998.00
-
Original price
$10,998.00
Original price
$10,998.00
$10,998.00
-
$10,998.00
Current price
$10,998.00
Click HERE to request a freight quote on this item.
The all-new multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.
It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.
The Little Red X3-D model is equipped with a 54" wide conveyor belt and three 48" wide infrared heaters (17,800W @ 240V total wattage) and can cure 720+ plastisol-printed garments/h, 370+ water-based or discharge-printed garments/h.
It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.
The Little Red X3-D model is equipped with a 54" wide conveyor belt and three 48" wide infrared heaters (17,800W @ 240V total wattage) and can cure 720+ plastisol-printed garments/h, 370+ water-based or discharge-printed garments/h.
With overall conveyor belt length of 88 in. (224 cm) long and 41 in. (104 cm) long heating chamber, the X3-D features a powerful 550 cfm targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.
Capacity can be increased as needs grow by adding additional heating chambers, extending the belt length and increasing the infinitely-variable speed setting of the digital belt control.
FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time
POWERFUL
17,800w@240V total wattage
Must be hard-wired into power terminal
DEPENDABLE
Industry-leading 15-year heater warranty
EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
CONSISTENT
Low friction belt aligner and DC belt speed control with digital display
HEAVY DUTY
"X-Series" Conveyor Belt Tracking System with Teflon coated fiberglass belt
ACCURATE
Digital PID Temperature controller is accurate to +/-1°F
ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater
EXPANDABLE
Add 24 in. (61 cm) chambers and/or 18 in. (46 cm) belt extension
POWER OPTIONS
240V / 78A / 1 Ph. / 3 wire 50/60HZ
240V / 45A / 3 Ph. / 4 wire 50/60HZ
380V / 30A / 3 Ph. / 5 wire 50/60HZ
All amps shown are FLA (Full Load Amps), not recommended line size! This dryer must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code
Available Product Options (call for configuration pricing)
- Additional heating chambers and conveyor belt extensions
- Locking casters for mobility
- Creeper gear
 |
 |
 |
 |