Texsource Four Color Process Ink - Magenta
Original price $15.31 - Original price $346.55
$15.31 - $346.55
Current price $15.31
Our Texsource Four Color Process inks have been specifically formulated for 4 color process (CMYK) printing on textiles. This technique can yield incredible, lifelike full color prints using only these primary colors. A thorough understanding of separations and the four color process are recommend before using these inks. Texsource offers a class on four color process printing if you are interested in this amazing technique - just visit our Classes page for more information.
These inks are an excellent ink choice for printing on cotton and cotton/synthetic blends where maximum opacity is desired. They are low-bleed, non-phthalate, low-fusing, fast-flashing, low-tack, plastisol-based printing inks that will make your prints simple and trouble free.
As always care should be taken when printing on 100% polyester garments, especially when printing lighter colors on dark garments. These colors may be particularly affected by dye migration issues. For maximum opacity, consider the use of an underbase print such as a blocker gray.
Our Process inks are best suited for 100% cotton and cotton blends (50/50). Excellent results can also be seen on newer Tri-Blend shirts. Care should be taken when printing on 100% polyester garments as an underbase may be required. These inks are equally at home on small manual presses or larger production automatic presses. For printing on nylon and nylon blend shirts the use of a catalyst such as Nylobond may be needed for proper adhesion.
Although curing times and temperatures will vary depending on equipment, substrate, and environment, a general guideline would be to set curing temperature to 320f with an approximate dwell time of 60 seconds.
The Texsource series of Process color inks can be used with a variety of common additives such as reducers, stretch, puff, thickener, etc. Refer to mixing instructions from your additive supplier for proper mixing ratios and instructions.
These inks can be used with all reputable emulsion brands that are for use with plastisol inks. This includes dual cure, diazo, and photopolymer emulsions.
The Process series inks are easy to clean with most brands of screen wash or ink remover products. As always, use proper safety procedures when handling ink or chemical products including proper hand and eye protection.