Skip to content

Ulano QTX Photopolymer Emulsion

by Ulano
SKU ULQTX-QT
Original price $39.99 - Original price $127.94
Original price
$39.99
$39.99 - $127.94
Current price $39.99
Select Size: Quart

free shipping item

Ulano QTX Screen Printing Emulsion is a ready-to-use, ultrafast-exposing SBQ photopolymer direct emulsion formulated for imprinted sportswear applications. Ulano QTX Emulsion's high solids content provides superior coating properties, better bridging of coarse mesh, and fast-drying capabilities. Ulano QTX Screen Printing Emulsion resists plastisol and water-based inks, is extremely durable, and reclaims easily. 

Do not subject to strong solvents during printing or washup.  Ulano QTX Emulsion is presensitized and must be handled in yellow safe light conditions before exposure.

Shelf Life - Approximate shelf life for this emulsion is 24 month (2 years) when stored at room temperature.  It should not be stored at temperatures above 80f (27c) or below 37f (0c).  For best results it should only be stored in its original container. 

Emulsion Exposure Differences
Proper screen exposure must take many factors into account – the emulsion type, coating thickness, exposure unit, etc. As a general guideline for the different emulsion types (diazo, dual cure, and photopolymer) use these times as a reference.

Photopolymer – These are typically the fastest exposing emulsions, with many exposing correctly from 30-50 seconds. The shortest times can be seen when using a newer LED-type exposure unit.

Dual Cure – If you have established a good exposure time with photopolymer emulsions, you can typically add 90 seconds (1.5 minutes) to that time for most dual cure emulsions.

Diazo - If you have established a good exposure time with photopolymer emulsions, you can typically add 210 seconds (3.5 minutes) to that time for most diazo emulsions.

These times will depend heavily on your exposure unit and should only be considered as a starting point.
safety data sheet