Vastex BigRed 4-D V54 Conveyor Dryer - 25,600w - 54"
Click HERE to request a freight quote on this item.
- 475 - 950+ plastisol shirts/hr*
- 216 - 432+ water-based or discharge shirts/hr*
- 72 - 144+ DTG shirts/hr* with digital white ink
Temperature controller accurate to +/-1°F (+/-0.5°C) Digital PID with fuzzy logic — industry's most advanced
Digital belt speed voltmeter — a must have
Make-up Air and Negative Exhaust Air — removes moisture and fumes ultra-fast
Filtered air intake prevents dust contamination of images. Filtered exhaust prevents garment lint from entering the blower or exhaust stack
* Production speeds are estimates and will vary depending on ink manufacturer, humidity of shop, and other variables.
- Heater Warranty - 15 Years
- Defect Warranty - 3 Years
- Cure Times - 950-1425 (depending on rows) Shirts Per Hour (Waterbased 432-648 Per Hour depending on rows)
- Belt Speed - 1.8 - 23.6 FPM
- Overall Length - 105"
- Overall Width - 71.4"
- Overall Height - 51.6"
- Belt Width - 54"
- Chamber Length - 54"
- Chamber Infeed Width - 58.5"
- Chamber Infeed Height - 2" - 7"
- Heater Size - 12" x 48" (x4)
- Heat Range - 0 - 900f
- Heater Wattage - 25,600w (4 heaters) Zone 1 = 7,200w, Zone 2 = 15,600w, Side Heaters (x2) = 1,400w
- Shipping Weight - 1,438lbs
- Shipping Dimensions - 92" x 65" x 63"
- Must be hard-wired into power terminal
- 240v / 110a / 1 phase - 3 wire 50/60HZ
- 240v / 70a / 3 phase - 4 wire 50/60HZ
- 400v / 49a / 3 phase - 5 wire 50/60HZ
- 480v / 42a / 3 phase - 4 wire 50/60HZ
All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
Available Product Options (call for configuration pricing)
- Additional heating chambers @ 54 in. (137cm) long
- Belt extensions, front or rear @ 18 in. (46 cm) long
- Side heaters to increase "cure zone"
- Control box on left side (right side standard)
- Exhaust hood for extra fume extraction
- Hat support rail
- Locking casters for mobility
- Heavy duty motor drive for conveyor belts
- Donut probe
- Additional heater clearance