Breathe easy with the xTool SafetyPro AP2—the state-of-the-art air purification system designed for all laser cutting & engraving users. This intelligent air purifier removes dust and odors like a champ, capturing 99.99% of dust and 97.97% of odors thanks to its 6-stage filtration system. With features like auto-sync, material-specific settings, and extended filter life, it's the ideal companion to your xTool laser machines for safely and cleanly bringing your creative visions to life!
Key Features of the xTool SafetyPro AP2 Air Purifier:
Removes 99.99% of dust & absorbs 97.97% of odors
6-layer filtration system features SuperCyclone filter for a clog-free experience
Includes intelligent features such as...
Auto-presets for different materials
Auto-on/off syncing with some xTool machines
Monitoring filter lifecycles
Cyclone separation technology extends pre-filter lifespan by 10 times for cost savings
Operates at 55 dB for quiet, non-disruptive use
Compatible with all* xTool laser models for seamless integration
*All xTool machines are compatible with this air purifier, but only some machines can utilize the auto-sync feature.
Six Layers, Zero Worries
The xTool SafetyPro AP2 features a comprehensive 6-layer filtration system weighing 20lbs, ensuring thorough removal of fumes, odors, and particles during laser processing. From large particles to microscopic dust and harmful gases, each layer targets specific contaminants, providing a safer and cleaner working environment. See below how each filter freshens your environment:
SuperCyclone: Blocks 99% of large particles
Pre-Filter: Captures 90% of visible debris
Medium Efficiency: Removes 95% of 0.3μm fine dust
Activated Carbon: Intercepts 84.4% of harmful fumes
Ultra-Dense Carbon Mesh: Absorbs 97.97% of odors
HEPA Filter: Filtrates 99.97% of 0.3μm dust, allergens, and viruses
Cyclone Force, Cleaner Course
The xTool SafetyPro AP2's SuperCyclone Separation Technology revolutionizes dust collection with 36 parallel cyclone groups. This innovative system captures 99% of large particles, extends filter lifespan, and offers easy maintenance, making it the ultimate solution for efficient and cost-effective laser cutting dust management.
Captures 99% of large particles
Extends pre-filter lifespan by up to 10×
Washable and reusable, reducing replacement costs
Prevents filter clogging for consistent performance
✔ Auto-On/Off (with certain xTool models) ✔ Auto Mode (auto matches ideal settings based on material) ✔ Filter Life Cycle Monitoring
Product Size (W × D × H)
290mm × 491mm × 542mm (11.42" × 19.33" × 21.34")
Product Weight
20.7kg (45.64lb)
Noise
55dB
Rated Power
20W
Warranty
12 Months
FAQ
Is the SafetyPro AP2 compatible with all xTool laser machines?
Yes, Manual mode is compatible with all xTool lasers: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, D1 Pro, M1, and F1.
Note: Auto-mode is only compatible with P2S, S1, M1 Ultra, and F1 Ultra.
Why can only certain models sync?
Syncing the AP2 with the engraving machine requires a Bluetooth dongle for information transmission.
Currently, only the S1, F1 Ultra, M1 Ultra, and P2S meet this requirement.
Is it compatible with laser machines from other brands?
The diameter size that the xTool SafetyPro AP2 can adapt to is 3 inches. If the size of the smoke exhaust pipe of the laser machine meets the requirements, then it is compatible. Note that it won't be able to utilize the Auto-mode as that is only reserved for the machines listed in the answer to the first question of this section.
Can the air outlets be vented directly into the room?
Yes, exhaust air can be discharged directly into the room because xTool's SafetyPro AP2 purified exhaust air meets the air quality requirements for direct indoor exhaust.
Do I need to turn off the laser fan when the purifier is in use?
The P2 and P2S models need to turn off the fan of the laser machine when used with the purifier. The P2S will automatically turn off the fan when linked with the purifier.
Other laser machines do not need to have the fan turned off when used with the purifier.
How often should the cyclone be cleaned?
It’s recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.
Does the cyclone need to be dried after cleaning?
Yes, it needs to be dried. A damp cyclone can affect the lifespan of the 3rd and 4th filters (the activated carbon layer and the carbon mesh layer).
See something that brings up a question? Contact us toll-free at 888-344-4657 (habla español), catch us on any of our social media accounts, or send us an email. We are here to serve you, and we look forward to hearing from you!
*Free Shipping - Our Free Shipping offer applies to any online order over $299 that contains eligible items (denoted by the Free Shipping banner under the product price). Generally this will apply to regular Stock supply items but may also include equipment if noted on that product page. Non-stock items may be shipped directly from the manufacturer and are not eligible for free shipping. Orders combining free and non-free shipping items will only be charged by the weight of the non free-shipping items. Free Shipping offer is only valid for orders delivered to continental US addresses. All free shipping orders will be shipped standard ground via best rate carrier. Our Free Shipping promotion does not cover additional UPS or FedEx fees such as Overweight Packages.
Texsource makes every effort to keep our website information accurate and up to date. However, Texsource is not responsible for errors in pricing and/or product descriptions, or alterations from displayed photos. If you have a question concerning such a product, please feel free to contact us.
All images, sounds, video, and graphics contained within this site are used as either property of Texsource, used under license, or used with permission. If you feel that an asset does not meet this requirement please email webmaster for inquiry or takedown request.
NOTE - Additional freight charges may be applied to your order for equipment purchases, special order items, motor freight shipments, crating fees, or dropship items that may incur shipping and handling fees that may not be known at the time of the order.
